|
 |
SCHRICK Variable Intake Manifold (VSR) - VR6 Engines
The Schrick Variable Intake Manifold has been specifically developed for VR6 engines.
For the first time identical effective-lengths of the intake runners have been developed which is something that is not available on a stock VR6 engine. This helps to achieve the optimum ram effect in the upper rpm ranges, producing the most power possible. While the runners are designed for maximum flow, the plenum's volume is split by a flapper-valve. This flap control calibrates the intake volume in relation to the engine speed. Perfectly matched resonance generates a pronounced increase in cylinder charge, especially in the middle rpm range and results in increased upper rpm airflow (best suited for an aggressive top-end style camshaft) and increased mid-range torque capacity where it is usually lost.
Weight: 5.00 kg
1.629,07 EUR per Täydellinen sarja
1.629,07 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
SCHRICK Camshafts - VR6 Engines
Includes one pair of camshafts for your VR6 engine
Weight: 5.00 kg
799,90 EUR per Täydellinen sarja
799,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Mechanische Stössel - Set 12 Stück - (solid lifters) SCHRICK für VR6 Motor für Rennsport
Set beinhaltet 12 Stück mechanische Stössel für den 2.8 oder 2.9l Motor VR6 von VW.
Tuote #: SCHRIMSTOESS
Weight: 0.20 kg
714,00 EUR per Täydellinen sarja
714,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
SACHS SRE Performance Kupplung Set für VW VR6
für VW Corrado, Golf III, Passat, Vento
INFO
- Motorkennbuchstbe: AAA, ABV
- Durchmesser (mm): 228
- Anzahl Zähne: 28
Übertragbares Drehmoment 420+Nm. Beinhaltet Druckplatte und torsionsgefederte Scheibe mit organischem Spezialbelag.
Tuote #: 883000000655
Weight: 7.00 kg
598,90 EUR per Sarja
598,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
SAMCO Coolant Hose Kit - Blue - Golf III VR6 2.8 Manual >1H-SW385-334/088-705
Includes all pictured parts . Please note that some models require the additional radiator flange bend (part # ARZ-SAM-VR-COR). The easiest way to determine whether or not you require this part is by standing in front of your radiator and confirming if the flange is at 90° or not. If it is NOT you will require the aforementioned part #.
Tuote #: TCS109C
Weight: 1.50 kg
359,00 EUR per Täydellinen sarja
359,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Valve Spring Set with Seats - Aluminum - 12V VR6 Engines
This kit is designed to work with engines requiring valve with three grooves. Set includes high quality aluminum valves and seats. Fits all 12V 2.8 and 2.9L VR6 engines.
Tuote #: 62.600.005
Weight: 1.00 kg
348,00 EUR per Täydellinen sarja
348,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
272° Camshaft - VR6 Engine
This camshaft set consists of two camshafts for your VR6 that includes lube and specs.
Fits all VR6 2.8 2.9L Engines
- 272° duration
- Overlap 113° (Intake/Exhaust)
- Lift 11.2mm (Intake/Exhaust)
- Increase of 10-12 HP
Note: These are used camshafts that have been completely machined, refinished and hardened. A cost effect alternative for quick horsepower gains
Tuote #: ARZNO2VR6
Weight: 5.00 kg
347,77 EUR per Täydellinen sarja
347,77 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
SACHS Kupplungsscheibe - Performance für VW VR6
für VW Corrado, Golf III, Passat, Vento
INFO
- Motorkennbuchstbe: AAA, ABV
- Durchmesser (mm): 228
- Anzahl Zähne: 28
Torsionsgefederte Scheibe mit organischen Belägen
Tuote #: 881861999793
Weight: 2.00 kg
319,90 EUR per kpl
319,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
SACHS Kupplungsscheibe - Racing VW VR6
für VW Corrado, Golf III, Passat, Vento
INFO
- Motorkennbuchstbe: AAA, ABV
- Durchmesser (mm): 228
- Anzahl Zähne: 28
Torsionsgefederte Sinterscheibe
Tuote #: 881861999750
Weight: 2.00 kg
309,90 EUR per kpl
309,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Adjustable Camshaft Sprocket - VW VR6 (with dual chain set-up)
Set includes 2 units as pictured
Tuote #: MT40311
Weight: 0.90 kg
309,00 EUR per Sarja
309,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Zylinderkopfschrauben / Dehnschrauben / ARP HD Stehbolzen hochfest für VW Zylinderkpf VR6 Motor 2 V (nicht 4 V /R32)
Gegenüber den Standart Dehnschrauben sind diese Stehbolzen mehrmals verwendbar und sind hochfest, Dadurch wird eine Ausdehnung eingeschränkt und der Zylinderkopf liegt und bleibt fest verschraubt auf dem Motorblock. Sie sind vorwiegend für den Turbo-Motorenbau erforderlich.
Der Komplettsatz beinhaltet alle Befestigungsbolzen wowie Scheiben und Muttern für einen Zylinderkopf.
Tuote #: ARP60406
Weight: 1.50 kg
306,60 EUR per Täydellinen sarja
306,60 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Valve Spring Set with Seats - Heavy duty - 12V VR6 Engines
Set includes 12 heavy duty strength valve springs and original equipment valve seats. Fits all 2.8 and 2.9L 12V engines.
Tuote #: 62.600.001
Weight: 1.00 kg
219,00 EUR per Täydellinen sarja
219,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Erleichterungsset > Kurbelwellenrad + Lichtmaschinenrad + Wasserpumpenrad + Servopumpenrad aus Aluminium für VR6 Motor
Kits includes the following:
- Aluminum Crank Pulley (2.3kg/5.06 lbs reduction in weight)
- Aluminum Alternator Pulley (143g vs. the original 370g)
- Aluminum Waterpump Pulley (187g vs. the original 410g)
- Aluminum Power Steering Pulley (224g vs. the original 454g)
- Made of 6061 T6 Aluminum
NOTE: Please specify whether or not your car has air conditioning when ordering!
Will ONLY fit 120A Alternators! Please order Item # AZVR004 if you DO NOT have a 120A alternator
Tuote #: AZVR004/2
Weight: 1.30 kg
189,00 EUR per Sarja
189,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
High Performance 4-Piece Aluminum VW VR6 Pulley Kit
Kits includes the following:
- Aluminum Crank Pulley (2.3kg/5.06 lbs reduction in weight)
- Aluminum Alternator Pulley (143g vs. the original 370g)
- Aluminum Waterpump Pulley (187g vs. the original 410g)
- Aluminum Power Steering Pulley (224g vs. the original 454g)
- Made of 6061 T6 Aluminum
NOTE: Please specify whether or not your car has air conditioning when ordering!
Will not fit 120A Alternators! Please order Item # AZVR004/2 in this case
Tuote #: AZVR004
Weight: 1.30 kg
189,00 EUR per Sarja
189,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Oil Cooler Hardware with Thermostat - VR6 Engines - silver hoses
For all VR6 Engines up to 1997. Hardware includes lines, thermostat and installation instructions. This hardware is compatible with all Racimex Oil Coolers. Connection is 3/4".
Tuote #: T50071THS
Weight: 0.20 kg
164,90 EUR per Täydellinen sarja
164,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
High Performance 3-Piece Aluminum VW VR6 Pulley Kit
Kits includes the following:
- Aluminum Crank Pulley
- Aluminum Waterpump Pulley
- Aluminum Power Steering Pulley
Tuote #: AZVR003
Weight: 1.16 kg
159,00 EUR per Sarja
159,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Oil Cooler Hardware with Thermostat - VR6 Engines
For all VR6 Engines up to 1997. Hardware includes lines, thermostat and installation instructions. This hardware is compatible with all Racimex Oil Coolers. Connection is 3/4".
Tuote #: T50071TH
Weight: 0.20 kg
154,90 EUR per Täydellinen sarja
154,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
K&N 57i Performance Injection Kit VW VR6
Komplettsatz
für Motor ABV 2,9l, oder AAA 2.8l, Passat, Golf, Vento, Corrado inkl. Teilegutachten und Anbaumaterial
Tuote #: TE570073
Weight: 0.40 kg
139,90 EUR per Täydellinen sarja
139,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Lightened Flywheel - VW VR6
Fits all 2.8 and 2.9L VR6 engines
This flywheel has been precisely machined and glass bead blasted. Flywheel is balanced within 0.02g!!! Core deposit required and will be refunded upon receipt of your original flywheel.
Tuote #: AZMTNVR61
Weight: 5.60 kg
139,90 EUR per kpl
139,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
19 Row Oil Cooler
19 Rows, Overall Length 210mm, Distance Between Connections 130mm, Fin Area Length 165mm, Distance Between Fastening Holes 190mm, Height 165mm. For engines between 3.5L-4.5L Thread: 3/4"
Tuote #: T50044
Weight: 0.20 kg
136,90 EUR per kpl
136,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
19 Row Oil Cooler
19 Rows, Overall Length 330mm, Distance Between Hose Connections 250mm, Fin Area Length 290mm, Distance Between Fastening Holes 310mm, Height 165mm. For engines between 3.5L-4.5L Thread: 3/4"
Tuote #: T50054
Weight: 0.20 kg
132,90 EUR per kpl
132,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
16 Row Oil Cooler
16 Rows, Overall Length 330mm, Distance Between Connections 250mm, Fin Area Length 290mm, Distance Between Fastening Holes 310mm, Height 140mm. For engines between 2.3L-3.5L Thread: 3/4"
Tuote #: T50053
Weight: 0.20 kg
121,90 EUR per kpl
121,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
High Performance 2-Piece Aluminum VW VR6 Pulley Kit
Kits includes the following:
- Aluminum Waterpump Pulley
- Aluminum Power Steering Pulley
Tuote #: AZVR002
Weight: 0.41 kg
109,00 EUR per Sarja
109,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Oil Cooler Hardware WITHOUT Thermostat - VR6 Engines
For all VR6 Engines up to 1997. Hardware includes lines and installation instructions. This hardware is compatible with all Racimex Oil Coolers. Connection is 3/4".
Tuote #: T50071
Weight: 0.20 kg
105,90 EUR per Täydellinen sarja
105,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
ECM Performance Chip - VW VR6
This chip is specifically designed to work with your European, distributor equipped, VR6 engine. Your old chip is simply removed and replaced with this one. Fast and easy!
Tuote #: AZMTNVR62
Weight: 0.10 kg
101,56 EUR per kpl
101,56 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
16 Row Oil Cooler
16 Rows, Overall Length 210mm, Distance Between Connections 130mm, Fin Area Length 165mm, Distance Between Fastening Holes 190mm, Height 140mm. For engines between 2.3L-3.5L Thread: 3/4"
Tuote #: T50043
Weight: 0.20 kg
99,00 EUR per kpl
99,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
ARP Hochleistungs Bolzenset für Schwungscheibe (10 Stück) für VW VR6 2V, 4V auch R32, Audi 3,6 / 4,2l (V8)
passend für VW VR6 2V, 4V auch R32, Audi 3,6 / 4,2l (V8)
Bolzenset besteht aus 10 Stück Bolzen für eine Schwungscheibe
Tuote #: MF60413
Weight: 0.50 kg
95,00 EUR per Sarja
95,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Milled (Shaved) VW VR6 Cylinder Head Service
This item is a service provided by us. Once you have purchased the service to have your cylinder head shaved, please send us your part. Once we have received it we will mill it and return it to you at the address provided. Turn around time is typically a maximum of 48 hours.
Tuote #: ARZWRL66
Weight: 10.00 kg
85,00 EUR per kpl
85,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Triple-layered Metal Headgasket VR6 for Increased Compression
Triple layered metal headgasket. This headgasket will increase your overall compression and as a result increase your performance. The use of new headbolts are required. Detailed installation specifications are included.
Perfect for use on all 2.8 or 2.9L VR6 engines.
Tuote #: AZEC512
Weight: 0.20 kg
76,94 EUR per kpl
76,94 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Bonrath Pro Intake Tube - VR6
Polished Stainless Steel. Includes mounting hardware
Tuote #: MW079132
Weight: 0.60 kg
74,90 EUR per Täydellinen sarja
74,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
