Digital Oil Temperature Gauge with a maximum reading of 150°C

Features a black glass face with digital display that only becomes visible once the ignition has been turned on.

Gauge Diameter = 52mm

Example of how the "Amber Series" functions

Upon starting your vehicle the display initially shows you a vehicle voltage reading. After approximately 50 seconds the display switches over to display the current oil temperature. If the oil temperature is under 40°C or above 118°C for more than 3 seconds the gauge will begin to flash the current temperature. In 10 minute intervals the display reverts back to show you a vehicle voltage rating that is displayed for 50 seconds before the current oil temperature is once again shown. During the 50 seconds that the voltage figure is displayed you are still able to monitor the oil pressure by viewing the LED bar display.

Green: 55 > 90°C (8 Green LED´s) 
Yellow:  99 > 115°C (5 Yellow LED´s) 
Red: 120 > 150°C (7 Red LED´s) 

Should the vehicle voltage at any point drop below 11V the display with begin to flash with a red warning light and the current voltage will be shown. The voltage display mode will remain until the problem has been corrected.